is coming upward;cylinder ring belt
is going downward;piston ring belt
is coming upward;piston ring belt
is going downward;cylinder ring belt
第1题:
If fuel injection to a four-stroke/cycle diesel engine begins earlier than designed, ignition may be delayed because the
A.cylinder compression pressure may not be high enough
B.cylinder compression temperature may be too high
C.fuel oil injection pressure may not be high enough
D.scavenge and purge process is incomplete
第2题:
Increase the cooling water flow to the engine
Secure or reduce fuel to that cylinder
Screw down on the pressure adjusting spring to decrease to decrease popping pressure
Readjust the injection timing
第3题:
If the diesel engine fuel injection timing is changed to delay the start of injection until the pistons are at top dead center, the engine will_________.
A.backfire through the air intakes
B.develop less power under load
C.have high firing pressures
D.lift its cylinder relief valves
第4题:
fluctuates with the engine speed to some extent, independent of the engine speed
keeps constant at all engine speed, dependent on the engine speed to some extent
keeps constant at all engine speed, independent of the engine speed
is decided by the engine speed, constant at all engine speed
第5题:
excessively late injection timing for each cylinder
incorrectly adjusted intake valve timing
incorrectly adjusted fuel injector
incorrectly adjusted intake valve clearance
第6题:
In a diesel engine, late fuel injection is indicated by black or gray exhaust smoke with ______.
A.low firing pressure
B.low exhaust temperature
C.mechanical knock in each cylinder
D.fuel knock in each cylinder
第7题:
feel the high pressure fuel line
check the cylinder exhausts for white smoke frequently
check the cylinder exhaust temperature
isolate each cylinder and inspect the injector
第8题:
High firing pressures and low exhaust temperature in a diesel engine may resultfrom( ).
A.decreased piston to cylinder head clearance
B.increased exhaust system back pressure
C.early fuel injection timing
D.low scavenge air temperature
第9题:
decreased piston to cylinder head clearance
increased exhaust system back pressure
early fuel injection timing
low scavenge air temperature
第10题:
low firing pressure
low exhaust temperature
mechanical knock in each cylinder
fuel knock in each cylinder