immobilize
to immobilize
immobilization
immobilizing
第1题:
When the ship, its main propulsion device equipped with clutch, arrived at the port and finished with the engine, the correct operation should be______.
A.disengaging the clutch firstly, then stopping the main engine
B.stopping the main engine firstly, then disengaging the clutch
C.stopping the cooling water pump firstly, then stopping the main engine
D.stopping the main engine and disengaging the clutch at the same time
第2题:
________ the ship met with very heavy weather in the Bay of Biscay and ________ the possibility of damage to cargo and ship,I hereby note my protest against all losses,damages,etc.
A.In view of/fear
B.Owing to/fearing
C.Owing to the fact that/in anticipation of
D.Due to/afraid
第3题:
My ship’s engine responds well to telegraph orders and takes about 80 seconds to reverse from full speed ahead to full speed astern. This sentence ______.
A.indicates the engine’s particulars
B.tells the engine’s function
C.shows the engine’s type
D.refers to the engine’s information
第4题:
Ⅰ + Ⅱ
Ⅰ ~ Ⅲ
Ⅰ ~ Ⅳ
Ⅰ + Ⅱ + Ⅳ
第5题:
fire fighting pump
the steering gear
life boat engine
the main engine
第6题:
If anything abnormal be found on the load change of main engine when the ship is entering in shallow waterway, before taking measures the engineer on duty should _______.
A.stop main engine immediately
B.ask the captain and the chief engineer's permission for stopping the engine
C.inquire the bridge for the situation initiatively
D.stop engine and inform bridge
第7题:
I hereby request permission to ______ the ship hull for routine maintenance.
A.put paint on
B.apply paint onto
C.oil
D.paint
第8题:
In the navigation,_______cause the shafting over load most easily
A.stopping the main engine suddenly
B.changing the main engine running direction suddenly
C.the sailing from the shallow water area to the deep water area
D.the ship's trim too much
第9题:
tie rod
thrust block
bedplate of main engine
frame of main engine
第10题:
reduce the fuel feeding of main engine of inner propeller
reduce the fuel feeding of main engine of outer propeller
firstly reduce the fuel of main engine of inner propeller, then reduce the fuel feeding of engine of outer propeller
reduce fuel feeding of two engines at the same time