the indicators
the starting valves
the cylinder lubricators
the turning gear
第1题:
Before putting on the starting air, the reversing and control gear should be _____.
A.operated
B.stopped
C.checked
D.removed
第2题:
第3题:
Before engaging the turning gear and turning the diesel engine, which of the following operation should be done except______.
A.open the indicator cocks
B.supply some CYL.Oil to cylinder liner wall with lubricator (only for two stoke diesel engine)
C.put the fuel handle in the "stop" position
D.pump up the air bottle
第4题:
pumped up
loaded
discharged
opened
第5题:
check the pyrometer readings
check the crankcase oil level
check the fuel oil strainers
clean the fuel system
第6题:
Before starting to hoist provisions, which should be checked?______.
A.Hoist rope is not kinked
B.Multiple part lines are not twisted around each other
C.The hook is centrally located over the load
D.All of the above
第7题:
盘车装置(turning gear)
第8题:
If the engine does start on air, but combustion does not immediately begin, the cause may be _____.
A.failure of the fuel pumps
B.starting air pressure too low
C.stop valve in air line closed
D.the turning gear still engaged
第9题:
open the indicator cocks
supply some LO to cylinder liner wall with lubricator
put the fuel handle in the stop position
pump up the air bottle
第10题:
to increase
to speed up
to prevent
to reduce