单选题After creating a virtual Ethernet adapter in slot #3 of logical partition #5， the user needs to configure the adapter in AIX. Which of the following location codes matches this virtual Ethernet adapter？（）A U9111.520.1000000-V5-C3-T1B U9111.520.1000000-

第1题：

Which of the following options applies to virtual Ethernet devices（）

• A、A virtual Ethernet adapter can only connect to other partitions within the same system.
• B、A virtual Ethernet  adapter needs  to be connected to an external VLAN  capable switch to be able to communicate with other partitions on the same system.
• C、A partition can support an unlimited number of virtual Ethernet devices.
• D、A virtual Ethernet adapter in the VIO Server that is part of a SEA should not have the "trunk flag" set

第2题：

A customer has a 4-core POWER6 570 with 4 partitions and a 2-port 1Gbps Integrated Virtual Ethernet (IVE) Adapter. They are having problems with throughput on the Ethernet adapter and want to improve performance. Which of the following solutions will help the customer with this issue for the least cost and with the least interruption?（）

• A、Order a 2-port 1Gbps Ethernet LAN adapter.
• B、Order a 2-port 10Gbps Ethernet LAN adapter.
• C、Upgrade the IVE adapter to a 4-port 1Gbps IVE adapter.
• D、Upgrade the IVE adapter to a 2-port 10Gbps IVE adapter.

第3题：

After creating a virtual Ethernet adapter in slot #3 of logical partition #5， the user needs to configure the adapter in AIX. Which of the following location codes matches this virtual Ethernet adapter？（）

• A、U9111.520.1000000-V5-C3-T1
• B、U9111.520.1000000-V3-C5-T1
• C、U9111.520.1000000-V5-C1-T3
• D、U9111.520.1000000-V1-C3-T5

第4题：

Company.com has a VIO server with a configured virtual Ethernet adapter and a physical Ethernet adapter with an IP address on their local public network. They want to re-configure the physical Ethernet adapter as Shared Ethernet Adapter. When the mkvdev command is run， the following method error is returned： /usr/lib/methods/cfgsea . Which of the following will most likely resolve the problem？（）

• A、Run cfgdev on the VIO server and re-run the mkvdev command.
• B、Run chdev -a sea_enable=yes on the physical Ethernet adapter.
• C、Remove and re-add the virtual Ethernet adapter.
• D、Remove the IP address from the physical adapter and re-run the mkvdev command.

第5题：

Company.com has two POWER5 servers. They want the two servers’ virtual Ethernets to appear on the same IP subnet. Which of the following will connect the client virtual Ethernet adapters to the physical Ethernet switch connecting the two servers？（）

• A、Configure a Shared Ethernet Adapter on the Virtual I/O Server.
• B、Use the same virtual LAN ID on each LPAR.
• C、Set up IP routing through an LPAR on each system.
• D、Set up an IP firewall through an LPAR on each system.

第6题：

A client has tried to update the firmware of an Ethernet adapter on a p5 590, however it repeatedly fails. What is the most likely cause of this problem?（）

• A、The adapter must be taken offline prior to the firmware update
• B、The adapter must be assigned to the service partition prior to the firmware update
• C、The system has not been rebooted since the adapter was added to the Logical Partition
• D、The adapter must be dynamically removed from the Logical Partition prior to the firmware update

第7题：

When creating a Virtual Ethernet adapter， which of the following steps is done FIRST？（）

• A、Generate a unique MAC address.
• B、Run cfgmgr to create device special files.
• C、Create a virtual device with "smitty vlan".
• D、Add a virtual Ethernet adapter to the partition profile.

第8题：

Which of the following commands will NOT determine the slot location of an Ethernet adapter in a system？（）

• A、lsattr -El
• B、lsdev -C
• C、prtconf
• D、lscfg -l

第9题：

A technical specialist defined a virtual Ethernet ent2 on the VIO server that has a physical  adapter， ent0. Which of the following commands should be used to configure the Shared Ethernet  Adapter？（）

• A、mkvdev -sea ent2 -vadapter ent0 -default ent0 -defaultid 1
• B、mkdev -virtual ent0 -adapter ent3 -default en2 -defaultid 1
• C、mkvdev -sea ent0 -vadapter ent2 -default ent2 -defaultid 1
• D、mkvdev ent0 -sea -vadapter ent2 -default ent2 -defaultid 1

第10题：

Which of the following allows the user to have two separate Ethernet networks share the same network adapter？（）

• A、VLAN tags
• B、EtherChannel
• C、Virtual Ethernet
• D、Shared Ethernet Adapter