问题:单选题Company.com is adding a new I/O drawer to an existing p5-570 with four LPARs and wants to re-balance the network cards in the I/O drawers. What is the best way to accomplish this?()A Add the devices as virtual adapters to a VIO server first,then add the I/O drawer and create the shared ethernet adaptersB Power down the partitions,run the diag a command when the system is brought back up and reconfigure the network cardsC Use the rmdev command to remove the devices,shut down the partitions and move the cads,then run the cfgmgr command after rebootD Detach the network cards,run rmdev on the devices and then dynamically reassign theadapters to the partitions and reconfigure
Thursday, April 4, 2024
问题:单选题When doing capacity planning for the Virtual I/O Server,what is the most important consideration?()A The I/O workload needs of the client LPARsB The processing requirements of the client LPARsC The memory requirements of the client LPARsD The virtual Ethernet requirements between client LPARs
Saturday, January 20, 2024
问题:单选题A technical specialist has installed a Host Bus Adapter (HBA) on a p5-550 server. The system has four AIX 5L V5.3 partitions and a Virtual I/O server. The HBA will be used to connect all four partitions to a DS8000 storage array. What else must be performed to make the storage available to the partitions?()A Allocate the HBA to a client partition.B Restart the Virtual I/O Server to detect the changes.C Install the device driver for the DS8000 in each of the four AIX partitions.D Allocate the HBA to the VIO server partition and install necessary drivers.
Thursday, October 19, 2023
问题:单选题A technical specialist has a requirement to implement a 4-way POWER5 server with a small Web server partition and a high performance database server partition. The Web server provides a client front-end to the database server. The most important concerns are speed of communication between the Web server and the database and I/O speed of the database. Which of the following virtualization features would be most appropriate?()A Virtual SCSIB Virtual EthernetC Virtual I/O ServerD Micro-Partitioning
Monday, January 22, 2024
问题:单选题Company.com has a two-way p5-520 that will be running three shared processor Micro-Partitions consuming 60 percent of system resources. Immediately prior to shipment, the customer discovered they need to run a fourth server that requires AIX 5L V5.2. Which of the following will satisfy this requirement?()A Change to a 4-way p5-550B Use Capacity on DemandC Configure a fourth logical partitionD Add memory to the configuration
问题:单选题Which feature of the IBM p5 servers enables customers to be confident that data within two distinct partitions on the server will be isolated?()A POWER HypervisorB Virtual LANC POWER5 processorD Redundant Power and Cooling
Sunday, March 17, 2024
问题:单选题A hosting company recently purchased an IBM p5-570 to use in their data center. The company intends to use the server to run several different client workloads. Which of the following features of the IBM p5 servers addresses the need for the isolation of workloads?()A Workload ManagerB Support for AIX 5.3C Logical partitioningD 64-bit or 32-bit kernel support
问题:单选题ompany.com has recently received a new p5-570 in the data center and wants to connect it to an existing HMC environment where each of the existing POWER5 servers has been assigned a static IP address. Which of the following actions should the technical specialist perform to set the service processor network address for a static IP?()A Configure the IP address through the first client partition.B Configure the IP address through the ASMI menus.C Configure the POWER5 service processor for DHCP from the HMC DHCP server.D Configure the HMC to use the default IP address on the service processor when acquiring the managed server.
Monday, March 4, 2024
问题:单选题Company.com wants to build two Dynamic Logical Partitions (DLPAR) on a p5-520. They have a requirement for communication between the two DLPARs. Which feature of virtualization will satisfy this requirement?()A VLANB Virtual EthernetC Virtual I/O Server SupportD Capped and Uncapped Partitions
Monday, March 11, 2024
问题:单选题Company.com would like to have the processor resources on their system efficiently shared between logical partitions, but does not require management of memory or I/O resources. Which of the following would accomplish this requirement?()A HMC command lineB Uncapped processorsC Partition Load ManagerD Enterprise Workload Manager
问题:单选题Company.com has recently added a partition to an existing p5-550 4-way with 8GB RAM. When the newly-created third partition is started, it fails to initialize. The configuration of the partitions is as follows: LPAR Min CPU Des CPU Max CPU P1 0.8 1.4 2.0 P2 0.8 1.4 2.0 P3 1.4 1.6 2.0 Which of the following actions will most likely resolve the problem?()A Reduce P3 max CPU to 1.8B Reduce min CPU on P3 to 1.2.C Recommend the purchase of additional CPU.D Ensure that partition 3 has a minimum of 4GB of memory.
问题:单选题Company.com has ordered an 8-way p5-570 and plans to deploy four AIX 5L v5.3 LPARs. The pre-installation system design has all eight processors being placed in the shared processor pool, and four Micro-Partitions being assigned resources from the pool. Prior to the implementation of the system, the customer informs the technical specialist that one of the applications is only supported on AIX 5L 5.2. Which of the following changes to the system design should the technical specialist make to accommodate this change?()A Create all the partitions as AIX 5.2, each having two dedicated processors.B Purchase a system with two additional processors that can be assigned to the AIX 5.2 Partition.C Specify an AIX 5.2 partition using dedicated processors, reducing the number of processors in the shared pool.D Use the virtual I/O server to manage the disks and network connections removing the need for different levels of device drivers.
Saturday, November 25, 2023
问题:单选题ompany.com has a Micro-Partitioned p5-570 4-way with six application partitions and two VIO servers. Each VIO server has been allocated 0.5 CPU and the application servers have been allocated 0.4 CPUs. The marketing department wants to deploy a new Web server to support the release of a product. The systems architect has recommended that the Web server will require a whole CPU. Which of the following should the technical specialist suggest to provide the most cost-effective deployment?()A Remove one application server partition and apply its CPU resources to the Web server.B Reassign the CPU from one of the VIO servers and create the new partition.C Add 0.6 CPU to one of the application servers and run the Web service with the application. D Reassign a total of 0.4 CPUs from the application servers and create a new partition with awhole CPU for new deployment.
问题:单选题Company.com wants to put two Micro-Partitions on a p5-570 and attach to a SAN. What is the best LPAR configuration to maximize SAN availability using four Host Bus Adapters (HBAs)?()A Two HBAs assigned to each redundant VIOS which provides VSCSI access to LUNsB Two HBAs assigned to each LPAR with each LPAR owning HBAs on the same PCI bussesC Two HBAs assigned to each LPAR with each LPAR owning HBAs on separate PCI bussesD One HBA assigned to each LPAR and two HBAs assigned to a VIOS providing VSCSI access to LUNs
问题:单选题Which of the following allows the user to have two separate Ethernet networks share the same network adapter?()A VLAN tagsB EtherChannelC Virtual EthernetD Shared Ethernet Adapter
Thursday, November 30, 2023
问题:单选题A technical specialist defined a virtual Ethernet ent2 on the VIO server that has a physical adapter, ent0. Which of the following commands should be used to configure the Shared Ethernet Adapter?()A mkvdev -sea ent2 -vadapter ent0 -default ent0 -defaultid 1B mkdev -virtual ent0 -adapter ent3 -default en2 -defaultid 1C mkvdev -sea ent0 -vadapter ent2 -default ent2 -defaultid 1D mkvdev ent0 -sea -vadapter ent2 -default ent2 -defaultid 1
问题:单选题Company.com has a single pSeries server with two shared processor logical partitions. The first partition has peak resource requirements during weekdays. The second partition has peak resource requirements during weekends. During the peak times, the total workload between the partitions does NOT exceed the capacity of the server. However, the partitions are not able to utilize the full capacity of the system during peak times, because the necessary CPU and memory resources are not always allocated to the busiest partition. Which of the following options would best balance these resources?()A Configure AIX Workload ManagerB Configure Partition Load ManagerC Configure eServer Workload ManagerD Use DLPAR from the HMC
问题:单选题Which of the following would be the FIRST step to configure a Virtual I/O Server(VIOS)?()A Boot the HMC with the VIOS media.B Assign SAN-attached disks to the database partitions.C Create logical volumes for the VIOS on rootvg disks.D Identify the location of the internal SCSI disks for the VIOS.