单选题Company.com is having trouble installing a fresh AIX image onto a newly defined partition on a p5-520. The assignment of the adapters to the each of the partitions is as follows： Fibre Channel Card 01 - partition one - required  Fibre Channel Card 02 -

第1题：

第2题：

Which of the following describes the advantage of using Fibre Channel over Ethernet （FCoE） in POWER6 and POWER7 Blades？（）

• A、The FCoE card provides both LAN and fibre channel function from a single card on the blade. 
• B、The FCoE advanced technology removes the need for any BladeCenter switching to support this function.
• C、Component reliability on the fibre channel over Ethernet is higher than on regular Ethernet and fibre channel adapters.
• D、The AIX device driver for FCoE has been completely rewritten for the current adapter， eliminating errors and performance issues.

第3题：

第4题：

A customer wants to boot from SAN with their IBM BladeCenter infrastructure.  What is required for the customer to be able to perform this？ （）

• A、4GB Modular Flash Drive for each Blade Server and Dual 15.8GB 2.5 Solid State Drive for each Blade Server 
• B、Cisco Intelligent Gb Ethernet Switch Module and IBM BladeCenter Copper Pass-thru Module 
• C、Fibre Channel Expansion Card for each Blade Server and Fibre Channel SAN Switch Module 
• D、Cisco Intelligent Gb Ethernet Switch Module and Dual 15.8GB 2.5 Solid State Drive for each Blade Server

第5题：

Company.com wants to reassign a host bus adapter （HBA） from one partition to another to  handle increased I/O workload on that partition. What needs to be done to dynamically move the card？（）

• A、Use the rmdev command to remove the card from the current partition before doing the DLPAR process.
• B、Take the source partition down and do the DLPAR function on the target partition.
• C、Assign the card to the required section of the target partition and run cfgmgr.
• D、Dynamically remove the card from the source and add to target profile then reactivate the target profile.

第6题：

A Fibre Channel fabric （or Fibre Channel switched fabric， FC-SW） is a switched fabric of FibreChannel devices enabled by a Fibre Channel switch. Fabrics are normally subdivided by Fibre Channel zoning. Each fabric has a name server and provides other services. Higher redundancy over FC-AL，P2P.Which path selection protocol is used by Fibre Channel fabrics？（）

• A、 OSPF
• B、 RIP
• C、 FSPF
• D、 VSANs

第7题：

Companycom is installing a Virtual IO Server to reduce the number of fibre channel adapters needed for each partition. The customer wants to use disk based copy functions to replicate the data on the LUNs. How can this be accomplished?（）

• A、Create LVM mirrors between LUNs
• B、MPIO is necessary as the device driver
• C、Use separate fibre adapters in the Virtual IO Server for each LUN
• D、Virtual IO Server is a disk subsystem and must control the LUNs behind it

第8题：

第9题：

A small IT department is deploying Power 720 servers exploiting virtualization technologies.  Each Power 720 will have two partitions， one with 6 cores and one with 2 cores， and both partitions having 32GB of memory each. Live Partition Mobility is being considered at some point in the future. What is the minimum AIX Edition required to support the customer？（）

• A、AIX Basic Edition
• B、AIX Express Edition
• C、AIX Standard Edition
• D、AIX Enterprise Edition

第10题：

A customer plans to install ten Microsoft Windows servers, three Linux servers, and five AIX servers, with two Fibre Channel host bus adapters each as part of an IBM DS8700 implementation. What multipathing driver is required to build a redundant solution?（）

• A、RDAC
• B、MPIO
• C、SSPC
• D、SDDPCM