单选题A server is being set up at a client location. The system has been powered up for a clean install of the base OS. The CD is in the drive. After 5 minutes, the system is hung. There is no activity with the CD-ROM drive and nothing to select on the scree

第1题：

A user reports that after configuring the BIOS to boot to the hard drive first, the system still tries to boot from the optical drive. Which of the following is the MOST likely cause?（）

• A、Optical drive
• B、Power supply
• C、CMOS battery
• D、CD-ROM disk

第2题：

A user requires more storage space on their computer. After a technician installs a second IDE drive in the computer, the system will not recognize that there are any hard drives installed. Which of the following is the MOST likely cause of the problem?（）

• A、The second hard drive has not been formatted for NTFS.
• B、The jumpers on both drives are set to the cable select position.
• C、The jumper on the first drive is set to master and the second is set to slave.
• D、The jumpers on both drives are set to the master position.

第3题：

第4题：

A server is being set up at a client location. The system has been powered up for a clean install of the base OS. The CD is in the drive. After 5 minutes, the system is hung. There is no activity with the CD-ROM drive and nothing to select on the screen. Which of the following procedures should be performed next?（）

• A、Boot off diskette and change boot device to CD
• B、Change the bootlist for normal mode and reboot
• C、Reboot and press 5/F5 after keyboard is displayed on the screen
• D、Press enter to open SP menus once OK is showing in the LEDs

第5题：

An administrator has added a new hard drive to a server that is running out of space on its C Drive and is experiencing slow performance.  The administrator needs to free up space on the C Drive.Which of the following is the BEST action for the administrator to take to free up space on the drive？（）

• A、Move the page file to the new drive.
• B、Copy the system32 directory to the new drive.
• C、Convert the C drive to a basic disk.
• D、Setup a software RAID to mirror the C drive.

第6题：

After installing a new SATA hard drive the technician notices the drive is hot to the touch and is giving off a slight odor. Which of the following should the technician do? （）

• A、Install a larger fan near the hard drive to cool the system.
• B、Clean the drive with compressed air and continue to use it.
• C、Remove and replace the drive.
• D、Apply more thermal compound and reseat the drive.

第7题：

A technician wants to secure a Windows 7 Ultimate notebook hard drive. Which of the following should the technician do to implement BitLocker?（） (Select TWO).

• A、Disable TPM in the system BIOS
• B、Run the BitLocker wizard and any necessary partitions
• C、Enable TPM in the system BIOS
• D、Enable TPM in the Windows 7 OS files
• E、Set up the OS and the system files on the same partition

第8题：

A system administrator has run topas on a server.  The output shows that the %iowait of the system is 60% and that most of the disk activity is on hdisk0.  Which of the following procedures should be performed to fix this problem?（）

• A、 Replace the hard disk with a faster disk drive. 
• B、 Add another paging space on another hdisk. 
• C、 Spread the data hdisk0 across several hdisks. 
• D、 Nothing, since %iowait is a measurement of CPU time.

第9题：

A patch has been applied to the operating system.  After rebooting, the system is hung.  Which of the following commands should have been performed to prevent the system from hanging?（）

• A、 lppchk, bosboot 
• B、 lslpp -l, oslevel 
• C、 installp -C, lppchk 
• D、 bosboot, synclvodm 

第10题：

Which action enables an administrator to make a VIO Server automatically activate when the physical machine is powered on？（）  

• A、Ensure the /etc/auto_start file exists on the VIos
• B、Ensure the ’cfgdev -a boot=yes’ command has been executed.
• C、Select the ’Automatically start when the managed system is powered on’ option within the vio Server lpar profile.
• D、Add the VIO Server to the ’Automatically start when the managed system is powered on’ field on the managed System properties.