Have the client purchase a SATA compatible system board.
Have the client purchase a SATA to IDE conversion kit.
Have the client return the drive and purchase an IDE compatible drive.
Have the client purchase a SCSI to SATA conversion kit.
第1题:
After installing a new hard drive into a server for the purpose of mirroring the data from the first drive to the second one, the server displays an “operating system not found” error. Which of the following should the technician do to boot the server from the original drive?()
第2题:
A technician has lost a necessary jumper for a new hard drive that must be installed immediately.Which of the following is the BEST solution?()
第3题:
A. Use a jumper from the motherboard where the new drive is going to be installed.
B. Use a jumper from a hard drive that is no longer functioning.
C. Contact the manufacturer of the new hard drive and have a replacement jumper shipped immediately.
D. The new hard drive must be replaced
第4题:
A user requires more storage space on their computer. After a technician installs a second IDE drive in the computer, the system will not recognize that there are any hard drives installed. Which of the following is the MOST likely cause of the problem?()
第5题:
An internal user has deleted a file named, pagefile.sys and is concerned this deletion may affect the computer. The user should be instructed to:()
第6题:
The customer brings their mini-tower and a new DVD/RW drive they want installed. The technician finds a second hard drive in an empty 5.25 bay connected to the secondary bus and jumpered as a slave. The ribbon cable will not stretch from the primary hard drive to the open 5.25 inch bay. Which of the following is the BEST solution?()
第7题:
A client purchased a new internal hard drive to act as a second drive on a legacy machine. When the client attempts to install the drive, the cable connector on the new drive is not compatible with the available IDE cables. It is determined that the client has purchased a SATA hard drive. Which of the following would the technician recommend as the BEST solution to this situation?()
第8题:
A. Set the drive up as basic
B. Format the drive to FAT32
C. Install a second hard drive
D. Set the drive as dynamic
第9题:
After installing a new SATA hard drive the technician notices the drive is hot to the touch and is giving off a slight odor. Which of the following should the technician do? ()
第10题:
A technician is working on a new computer running Windows XP and the hard drive is formatted at 20GB but is an 80GB hard drive. There is not another partition and no extra space can be foundunder Windows explorer. Which of the following would be the BEST way to partition the remainder of the hard drive without data loss? ()