IBM(000-104)
单选题An administrator is supporting an AIX 6.1 LPAR remotely and needs a tape operator to plug a cable into an Ethernet adapter. The tape operator does not have POWER6 595 knowledge. What can the administrator do to assist the tape operator to locate the co
题目
Advise the tape operator to review the hardware service guide.
Use the diag command to set the Ethernet adapter slot LED to flash.
Advise the tape operator to check the WWN stickers of all Ethernet adapter in the I/O drawers.
Create a login account for tape operator on the HMC and advise the tape operator to locate the adapter using the GUI step by step.
相似问题和答案
第1题：
An administrator has implemented the following LPARs on a Power 570 with 32 GB memory with 512 MB remaining for allocation： LPAR 1 memory ： min = 10 GB des = 15 GB max = 24 GB LPAR 2memory ： min = 10 GB des = 15 GB max = 24 GB The administrator receives a request to add 2 GB to LPAR 1. The only way to do this is by moving memory from LPAR 2 to LPAR 1. The administrator attempts to move the memory， but the operation fails. The administrator can however allocate 512 MB that is free to LPAR 1 on the 570. What is the most likely cause of this failure when dynamically moving memory？（）
- A、 Maxperm% is set too low on LPAR 2
- B、 Insufficient paging space on LPAR 1
- C、 Service IBM.DRM is unavailable on LPAR 1
- D、 Insufficient pinnable memory frames available on LPAR 2
正确答案:D
第2题：
An AIX LPAR has been reconfigured to use direct-attached disks. What is the best way to fully remove and delete the Virtual IO volumes?（）
- A、On the AIX LPAR: rmdev -dl hdisk#, rmdev -dl vscsi#
- B、On the VIO Server: rmdev -dev rootvg_disk, rmlv rootlv_name
- C、On the AIX LPAR: rmdev -dl hdisk#, rmdev -dl vscsi# On the VIO Server: rmdev -dev rootvg_disk, rmlv rootlv_name
- D、On the VIO Server: rmdev -dev rootvg_disk, rmlv rootlv_name On the AIX LPAR: rmdev -dl hdisk#, rmdev -dl vscsi#
正确答案:C
第3题：
Companycomhasthefollowing:8x1.65GHzCPUs16GBMemory4LPARsLPAR1:Test/Dev1CPU,2GBMemory,1FibreChannelHBA,AIX5.3LPAR2:QA1CPU,2GBMemory,1FibreChannelHBA,AIX5.3LPAR3:Prod3CPUs,6GBMemory,1FibreChannelHBA,AIX5.3LPAR4:WebApp3CPUs,6GBMemory,1FibreChannelHBA,SUSELinuxUtilizationovera30dayperiodLPAR1:Averageutilizationwas15%,Peakutilizationwas100%LPAR2:Averageutilizationwas25%,Peakutilizationwas100%LPAR3:Averageutilizationwas50%,Peakutilizationwas90%LPAR4:Averageutilizationwas35%,Peakutilizationwas100%IfthecustomerhasarequirementforallfourLPARstobemovedtoap5590andassignedtoasharedpool.
Whichofthefollowingwouldbestdescribetheprofilerequirements?（）
第4题：
An administrator plans to use bootable AIX media to boot a system into maintenance mode. The system is running AIX 5.3 TL09 with a64-bit kernel.The administrator has a selection of media available. Which media should the administrator use?（）
- A、AnyAIXbootablemedia，providingitisa64-bitvariant
- B、AnyAIXbootablemedia，providingitisAIX5.1orlater
- C、AnyAIX5.3bootablemedia，providingitisTL09orlater
- D、AnyAIX6.1bootablemedia，providingitisTL02orlater
正确答案:C
第5题：
What facilitates the installation of the base fileset for the Data Encryption Standard （DES） Library Routines（）
- A、Fix Central
- B、AIX 6.1 disc
- C、IBM AIX Toolbox
- D、AIX Expansion Pack
正确答案:D
第6题：
The administrator changed the number of virtual processors from 1 to 2 in the default_profile of an LPAR. The operator ran thecfgmgr command expecting to see 2 processors after that, but did not see them. What action must be done to apply the changes?（）
- A、Reboot AIX within the LPAR.
- B、Run cfgmgr against the device sys0.
- C、Shutdown and then activate the default_profile.
- D、Ensure the RSCT daemon is operative and run cfgmgr again.
正确答案:B
第7题：
Which of the following versions of AIX provide both multi-path I/O and dynamic LPAR？（）
- A、AIX V5.2
- B、AIX V4.2
- C、AIX V4.3
- D、AIX V5.1
正确答案:A
第8题：
A.AIX6.1
B.AIX5.3
C.RedHat10
D.SUSELINUX11
第9题：
An administrator plans to use bootable AIX media to boot a system into maintenance mode. The system is running AIX 5.3 TL09 with a 64-bit kernel. The administrator has a selection of media available. Which media should the administrator use？（）
- A、Any AIX bootable media， providing it is a 64-bit variant
- B、Any AIX bootable media， providing it is AIX 5.1 or later
- C、Any AIX 5.3 bootable media， providing it is TL09 or later
- D、Any AIX 6.1 bootable media， providing it is TL02 or later
正确答案:C
第10题：
An administrator is installing AIX 6.1 on a new LPAR and the boot sequence has stalled with reference code 0c31. What is the most likely cause?（）
- A、The system is waiting for user input to define console type lft0.
- B、The system is waiting for user input to define console type tty0.
- C、The system is waiting for user input to define console type vty0.
- D、The system is waiting for user input to define console type vsa0.
正确答案:C