单选题On a Hardware Management Console （HMC） at version 7， an administrator has an LPAR defined with a minimum of 0.1 processors and a maximum of 4 processors. The administrator wants to go from 1 processing unit to 3 processing units for this partition. In 

第1题：

An administrator is creating a new LPAR with 6 virtual processors and 4 processing units. This LPAR must have the highest priority in the shared processor pool.  Which weight should be assigned to this LPAR？（）

• A、 0
• B、 1
• C、 255
• D、 256

第2题：

On a Hardware Management Console (HMC) at version 7, an administrator has an LPAR defined with a minimum of 4GB of memory, 6GB desired and a maximum of 16 GB of memory. The administrator wants to go from 5 GB to 8 GB assigned memory for this partition. In order to make the change, what value should the administrator enter into the add processor resources window? （）

• A、2 
• B、3 
• C、4 
• D、8

第3题：

The administrator wants to backup the existing VIO server software and its current configuration before applying an update.  What command will the administrator use to backup the VIO server software so that the backup can be restored from a Network Installation Manager （NIM） server or a Hardware Management Console （HMC）？（）

• A、 mksysb -t vio /mountpoint
• B、 backupios -file /mountpoint
• C、 mksysb -i /mountpoint/vio.mksysb
• D、 backupios -mksysb -file /mountpoint/vio.mksysb

第4题：

The Information Technology （IT） department wants to consolidate two 4-way p5-550 servers onto an 8-way p5-570. However， the departments using the p5-550 servers are concerned about quality of service after consolidation. Which per-partition processor allocation would provide comparable performance while still allowing the POWER5 hypervisor to optimize the processing workload of the server？（）

• A、4.0 processing units， 4 virtual processors， capped mode
• B、4.0 processing units， 4 virtual processors， uncapped mode
• C、4.0 processing units， 8 virtual processors， capped mode
• D、4.0 processing units， 8 virtual processors， uncapped mode

第5题：

An administrator is creating a new logical partition (LPAR) with 6 virtual processors and 4 processing units. This LPAR must have the highest priority in the shared processor pool. Which weight should be assigned to this LPAR?（）

• A、 0
• B、 1
• C、 255
• D、 256

第6题：

An administrator has set up three partitions using a shared processor pool with 2 processors and SMT turned on. The partitions are activated in the following sequence: Partition one: Min = 0.5, max = 3.0, desired = 1.0; Partition two: Min = 1.0, max = 3.0, desired = 1.5 Partition three: Min = 1, max = 0.5, desired = 2. What is the outcome?（）

• A、Partition one starts and has 3.0 logical processors. Partition two does not start. Partition three has 1.0 logical processors. 
• B、Partition one starts and has 1.5 logical processors. Partition two has 1.0 logical processors. Partition three has 0.1 processors. 
• C、Partition one starts and has 2.0 logical processors. Partition two start and has 2.0 logical processors. Partition three does not start. 
• D、Partition one starts and has 2.0 logical processors. Partition two has 1.0 logical processors. Partition three has 0.1 logical processors.

第7题：

On a Hardware Management Console （HMC） at version 7， an administrator has an LPAR defined with a minimum of 0.1 processors and a maximum of 4 processors. The administrator wants to go from 1 processing unit to 3 processing units for this partition. In order to make the change，  what value should the administrator enter into the add processor resources window？ （）

• A、 2
• B、 3
• C、 1.0
• D、 2.9

第8题：

A customer would like to create a shared processor partition with 16 virtual processors. What is the minimum number of processing units required in the partition profile?（）

• A、0.80
• B、0.16
• C、1.60
• D、0.10

第9题：

Which one of these statements is true regarding hot pluggable PCIe and PCI-X slots in a Power 550?（）

• A、Cards can be added and then enabled via Hardware Management Console (HMC) GUI or command line. 
• B、The HMC allows access to the Advanced System Management Interface (ASMI), where the slots can be managed. 
• C、If the empty slot was already allocated to an LPAR, the LPAR can use the card after the cfgmgr script has been run. 
• D、The Hardware Management Console (HMC) GUI can guide a customer through the process of adding a card to an empty slot. 

第10题：

Micro-Partitioning can be defined as（）.

• A、multiple partitions that share the processing power of a set of physical processors where a partition can be assigned as little as 1/2 of a physical processor's resource. 
• B、multiple partitions that share the processing power of a set of physical processors where a partition can be assigned as little as 1/100th of a physical processor's resource. 
• C、an advanced virtualization feature of POWER5 systems with Linux (SUSE and Red Hat for POWER) and AIX 5L Version 5.3 that allows multiple partitions to share the processing power of a set of physical processors. 
• D、an advanced virtualization feature of POWER5 systems with Linux (SUSE and Red Hat for POWER) and AIX 5L Version 5.2 or 5.3 that allows multiple partitions to share the processing power of a set of physical processors.