Maxperm% is set too low on LPAR 2
Insufficient paging space on LPAR 1
Service IBM.DRM is unavailable on LPAR 1
Insufficient pinnable memory frames available on LPAR 2
第1题:
On a Hardware Management Console (HMC) at version 7, an administrator has an LPAR defined with a minimum of 4GB of memory, 6GB desired and a maximum of 16 GB of memory. The administrator wants to go from 5 GB to 8 GB assigned memory for this partition. In order to make the change, what value should the administrator enter into the add processor resources window? ()
第2题:
Companycom has the following: 8 x 1.65GHz CPUs 16GB Memory 4 LPARs LPAR 1: Test/Dev 1 CPU, 2GB Memory, 1 Fibre Channel HBA, AIX 5.3 LPAR 2: QA 1 CPU, 2GB Memory, 1 Fibre Channel HBA, AIX 5.3 LPAR 3: Prod 3 CPUs, 6GB Memory, 1 Fibre Channel HBA, AIX 5.3 LPAR 4: Web App 3 CPUs, 6GB Memory, 1 Fibre Channel HBA, SUSE Linux Utilization over a 30 day period LPAR 1: Average utilization was 15%, Peak utilization was 100% LPAR 2: Average utilization was 25%, Peak utilization was 100% LPAR 3: Average utilization was 50%, Peak utilization was 90% LPAR 4: Average utilization was 35%, Peak utilization was 100% If the customer has a requirement for all four LPARs moved to a p5 590 and to have dedicated CPU resources. Which of the following would best describe the profile requirements?()
第3题:
AnadministratorhasimplementedthefollowingLPARsonaPower570with32GBmemorywith512MBremainingforallocation:LPAR1memory:min=10GBdes=15GBmax=24GB
LPAR2memory:min=10GBdes=15GBmax=24GBTheadministratorreceivesarequesttoadd2GBtoLPAR1.TheonlywaytodothisisbymovingmemoryfromLPAR2toLPAR1.Theadministratorattemptstomovethememory,buttheoperationfails.Theadministratorcan
howeverallocate512MBthatisfreetoLPAR1onthe570.
Whatisthemostlikelycauseofthisfailurewhendynamicallymovingmemory?()
第4题:
Which of the following x366 8GB memory configurations will produce the best performance?()
第5题:
A system administrator has been instructed to attach storage in their client LPARs, in a Power 770, with fibre channel adapters using N_port ID virtualization (NPIV). Which of the following partitions has the minimum requirements to utilize virtual fibre channel?()
第6题:
An administrator has implemented the following LPARs on a Power 570 with 32 GB memory with 512 MB remaining for allocation: LPAR 1 memory : min = 10 GB des = 15 GB max = 24 GB LPAR 2memory : min = 10 GB des = 15 GB max = 24 GB The administrator receives a request to add 2 GB to LPAR 1. The only way to do this is by moving memory from LPAR 2 to LPAR 1. The administrator attempts to move the memory, but the operation fails. The administrator can however allocate 512 MB that is free to LPAR 1 on the 570. What is the most likely cause of this failure when dynamically moving memory?()
第7题:
An administrator is adding additional memory into a server that registers 1GB of memory in the OS and notices that the system has 2GB of memory physically installed; however, the server only shows 1GB of memory during POST. Which of the following is the MOST likely reason for this?()
第8题:
A system administrator is creating four LPARs on a Power 550. The Power 550 has 64GB of memoryinstalled and 32GB activated. The system administrator sets the minimum dedicated memory to 8GB in the profile for each LPAR. After activating three LPARs, he is not able to activate the fourth LPAR. What is the likely cause of the problem?()
第9题:
Company.com has recently added a partition to an existing p5-550 4-way with 8GB RAM. When the newly-created third partition is started, it fails to initialize. The configuration of the partitions is as follows: LPAR Min CPU Des CPU Max CPU P1 0.8 1.4 2.0 P2 0.8 1.4 2.0 P3 1.4 1.6 2.0 Which of the following actions will most likely resolve the problem?()
第10题:
A competitor informed a customer that blades were not suitable to implement robust virtual computing infrastructures due to memory limitations. What is the maximum memory supported by an IBM Intel Blade using what size memory DIMMs? ()