Mechanical lifting of air by the upslope slant of the terrain is called ______.
A.vertical lifting
B.convective lifting
C.advective lifting
D.topographic lifting
第1题:
Personnel who are moving or handling material aboard ship should NOT follow which of the listed practices?
A.Signaling that all personnel are clear before lifting or lowering material
B.Examining material for sharp edges or protruding points before handling
C.Closing, tagging or securing valves that permit entrance of steam, water, or air into a fitting or other equipment
D.Throwing materials from high places to the deck
第2题:
Your vessel has a gasoline engine and a mechanical exhaust ventilation system.BEFORE starting the engine,the exhaust blower should be run long enough to ______.
A.warm up the exhaust blower motor
B.provide a proper supply of fresh air for the engine(s)
C.see the system is in good operating condition
D.insure at least one complete change of air in the compartments concerned
第3题:
An automobile sling is used for ________
A.lifting aircraft and helicopters
B.lifting any kinds of cargo
C.lifting the heavy boxes
D.lifting cars and trucks
第4题:
Due to the large amount of heat picked up by the air in boiler and engine rooms, it would be impracticable to maintain ambient conditions within the comfort zone by air conditioning or any other means. The normal practice is to provide copious mechanical ventilation; in boiler rooms, the quantity is equated to the combustion requirements, while in a motor ship engine room the supply may be 25-50% in excess of the requirements of the engines.
The axial flow fan is particularly suited to handle these large air volumes at the moderate pressures required, while of course the “straight-through” flow feature places it at an advantage over the centrifugal fan.
The increasing adoption of automation, with the provision of a separate control room makes less significant the fact that comfort conditions cannot be maintained in the engine room all the time. Which of the following devices should be taken to maintain ambient conditions of the boiler and machinery space?
A.air compressor
B.air cooler
C.air-conditioning plant
D.mechanical ventilation plant
第5题:
Current refers to the ______.
A.vertical movement of the water
B.horizontal movement of the water
C.density changes in the water
D.None of the above
第6题:
题干材料:Due to the large amount of heat picked up by the air in boiler and engine rooms, it would be impracticable to maintain ambient conditions within the comfort zone by air conditioning or any other means. The normal practice is to provide copious mechanical ventilation; in boiler rooms, the quantity is equated to the combustion requirements, while in a motor ship engine room the supply may be 25-50% in excess of the requirements of the engines.
The axial flow fan is particularly suited to handle these large air volumes at the moderate pressures required, while of course the “straight-through” flow feature places it at an advantage over the centrifugal fan.
The increasing adoption of automation, with the provision of a separate control room makes less significant the fact that comfort conditions cannot be maintained in the engine room all the time.
问题:Which of the following devices should be taken to maintain ambient conditions of the boiler and machinery space?
A.air compressor
B.air cooler
C.air-conditioning plant
D.mechanical ventilation plant
In a motor vessel, the air quantity which the engine room need is_______ of the requirements of the engines.A.less than 25-50%
B.more than 125-150%
C.more than 25-50%
D.less than 125-150%
According to this passage, which of the following statements is true?
A.In boiler and machinery spaces, there is the air conditioning
B.In the boiler rooms the requirement of air volume should meet 25-50% of combustion requirement
C.To maintain the comfort zone in the separate control room the air conditioning plant should be fitted
D.The comfort conditions can be maintained in the engine room all the time
At the middle pressure and large air quantity,_________ is more suitable.A.an axial flow fan
B.a radial flow blower
C.a centrifugal fan
D.an auxiliary blower
请帮忙给出每个问题的正确答案和分析,谢谢!
第7题:
What power source actuates a solenoid valve ________.
A.Air pressure
B.Hydraulic pressure
C.Electric current
D.Mechanical force
第8题:
The experiment is carried cut to prove ______.
A. water pushes on your body when you swim underwater.
B. the earth is surrounded by a layer of air called the atmosphere.
C. the pressure of air around us has a powerful force.
D. the air pressure is not equalized around us.
第9题:
LIFTING THE ANCHOR FROM THE BOTTOM is called ______.
A.broaching the anchor
B.shifting the anchor
C.walking the anchor
D.weighing the anchor
第10题:
Torque允许使用()编辑器来手动修改地形。