其他

Which commands are required to properly configure a router to run OSPF and to add network 192.168.16.0／24 to OSPF area 0?()A.Router(config)#router ospf 1B.Router(config)#router ospf 0C.Router(config)#router ospf area 0D.Router(config-router)#network 192.1

题目
Which commands are required to properly configure a router to run OSPF and to add network 192.168.16.0／24 to OSPF area 0?()

A.Router(config)#router ospf 1

B.Router(config)#router ospf 0

C.Router(config)#router ospf area 0

D.Router(config-router)#network 192.168.16.0 0.0.0.255 area 0

E.Router(config-router)#network 192.168.16.0 0.0.0.255 0

F.Router(config-router)#network 192.168.16.0 255.255.255.0 area 0

如果没有搜索结果，请直接 联系老师 获取答案。
如果没有搜索结果，请直接 联系老师 获取答案。
相似问题和答案

第1题：

Which OSPF router type summarizes network advertisements from one OSPF area into another?()

A.A

B.B

C.C

D.D


参考答案：A

第2题：

A router has been configured with the commands router os pf 9, network 172.16.1.0 0.0.0.255 area 8, and network 172.16.0.0 0.0.255.255 area 9, in that order. No other OSPF -related commands have been configured. The answers list the IP addresses that could be assigned to this router's Fa0/0 interface. Which an swers list an IP address/prefix length that would cause the router to put Fa0/0 into area 9?（）

  • A、172.16.0.1/23
  • B、172.16.1.1/26
  • C、172.16.1.1/24
  • D、172.16.0.255/23
  • E、None of the other answers is correct.

正确答案:A,D

第3题：

某园区网采用 OSPF路由协议,参与 OSPF的网络地址是 169.111.0.0/16, Cisco路由器的正确配置是 （ ） 。

A) Rounter(config)# router ospf63

Rounter(config-router)# network 169.111.0.0 0.0.0.0 area 0

Rounter(config_router)# area o range 169.111.0.0 255.255.0.0

B) Rounter(config)# router ospf63

Rounter(config-router)# network 169.111.0.0 255.255.0.0 area 0

Rounter(config-router)# area o range 169.111.0.0 255.255.0.0

C) Rounter(config)# router ospf63

Rounter(config-router)# network 169.111.0.0 0.0.255.255 area 0

Rounter(config_router)# area o range 169.1-11.0.0 255.255.0.0

D) Rounter(config)# router ospf63

Rounter(config_router)# network 169.111.0.0 0.0.255.255 area 0

Rounter(config-router)# area o range 169.111.0.0 0.0.255.255


正确答案：C
(23)C) 【解析】在全局配置模式下，使用“router ospf ”命令，启动OSPF进程：在路由器的OSPF配置模式下，使用“network ip<子网号> area<区域号>”命令定义参与OSPF的子网地址，或使用“area<区域号>range<子网地址><子网掩码>”命令定义某一特定范围子网的聚合。由于network 命令中的是子网掩码的反码，所以本题选项c)正确。

第4题：

Which commands are required to properly configure a router to properly configure a router to run OSPFand to add network 192.168.16.0/24 to OSPF area 0？（）

  • A、Router（config）#router ospf 1
  • B、Router（config）#router ospf 0
  • C、Router（config）#router ospf  area 0
  • D、Router（config-router）#network 192.168.16.0 0.0.0.255 area 0
  • E、Router（config-router）#network 192.168.16.0 0.0.0.255 0
  • F、Router（config-router）#network 192.168.16.0 255.255.255.0 area 0

正确答案:A,D

第5题：

Which of the following describe the process identifier that is used to run OSPF on a router (Choose two.)（）。

  • A、It is locally significant
  • B、It is globally significant
  • C、It is needed to identify a unique instance of an OSPF database
  • D、It is an optional parameter required only if multiple OSPF processes are running on the router
  • E、All routers in the same OSPF area must have the same process ID if they are to exchange routing information

正确答案:A,C

第6题：

Refer to the diagram. Which OSPF configuration command is required to configure Area 3 a s atotally stubby area?()

A. On the ABR router ospf 10 area 3 stub

B. On all Area 3 routers router ospf 10 area 3 stub

C. On all Area 3 routers router ospf 10 area 3 stub no - summary

D. On the ABR router ospf 10 area 3 nssa

E. On the ABR rou ter ospf 10 area 3 stub no - summary


参考答案：E

第7题：

A new router, named TK1, is being installed. You wish to add this router to your existing OSPF network. In doing so, you configure the following: TK1(config)# router ospf 1 TK1(config-router)# network 10.10.10.0 255.255.255.0 area 0 After making this change, you notice that the networks attached to TK1 are not being learned by the other OSPF routers. What could be the cause of this?（）

  • A、The AS is not correctly configured
  • B、The network subnet mask is incorrectly configured
  • C、The network wildcard mask is configured incorrectly
  • D、The network number is not correctly configured
  • E、The process id is configured incorrectly
  • F、None of the above

正确答案:C

第8题：

某园区网采用OSPF路由协议，参与OSPF的网络地址是169.111.0.0/16 Cisco路由器的正确配置是

A．Router (config) #router ospf 63 Router (config-router) #network 169.111.0.0 0.0.0.0 area 0 Router (config-router) #area 0 range 169.111.0.0 255.255.0.0

B．Router (config) #router ospf 63 Router (config-router) # network 169.111.0.0 255.255.0.0 area 0 Router (config-router) #area 0 range 169.111.0.0 255.255.0.0

C．Router (config) #router ospf 63 Router (config-router) #network 169.111.0.0 0.0.255.255 area 0 Router (config-router) #area 0 range 169.111.0.0 255.255.0.0

D．Router (config) #router ospf 63 Router (config-router) #network 169.111.0.0 0.0.255.255 area 0 Router (config-router) #area 0 range 169.111.0.0 0.0.255.255


正确答案：C

第9题：

Which commands are required to properly configure a router to run OSPF and to add network 192.168.16.0/24 to OSPF area 0?（）

  • A、TestKingRouter(config)# router ospf 0
  • B、TestKingRouter(config)# router ospf 1
  • C、TestKingRouter(config)# router ospf area 0
  • D、TestKingRouter(config)# network 192.168.16.0 0.0.0.255 0
  • E、TestKingRouter(config)# network 192.168.16.0 0.0.0.255 area 0
  • F、TestKingRouter(config)# network 192.168.16.0 255.255.255.0 area 0

正确答案:B,E

第10题：

Which two of these steps are minimum requirements to configure OSPFv3 under IPv6？（）

  • A、Configure a routing process using the command ipv6 router ospf [process-id].
  • B、Add the network statement for the interfaces on which OSPF will run.
  • C、Configure OSPF on the interface that it will run on.
  • D、Use the passive-interface command on the interfaces on which OSPF should not run.
  • E、Enable routing.

正确答案:C,E

更多相关问题
相关内容