You are the network administrator for Ezonexam.com.
You need to upgrade a computer from Windows NT Server 4.0 to Windows 2000 server. The server has dual processors, 2 GB of RAM, a RAID controller with five SCSI hard disks in an array, and a generic 10/100-MB network adapter. You begin the installation of the Windows 2000 Server operating system.
During the text portion of the installation, you receive the following error message:
"Stop 0x00000078 Inaccessible_boot_device."
You want to successfully upgrade the computer.
What should you do? (Each answer presents part of the solution. Choose two)
A.Start the computer by using a DOS disk and run FDISK.
B.Update the firmware on the RAID controller.
C.Restart the installation. During the text-mode setup-mode setup, press F6.
D.Restart the installation. During the text-mode setup, create a new partition.
E.Insert a floppy disk containing the OEM SCSI driver and specify the additional driver.
第1题:
You are the administrator of a Windows NT Server 4.0 computer names Ezonexam1.
Ezonexam1 is a backup domain controller in Ezonexam.com's Windows 2000 Active Directory domain. Ezonexam1 contains five hard disks. Disks 0 and 1 are configured as a Windows NT 4.0 mirror set and contain the operating system files. There are 300 MB of disk space remaining on the Windows NT 4.0 mirror set. Disk 2, 3, and 4 are configured as a Windows NT 4.0 stripe set with parity and contain employee data files. The Windows NT 4.0 stripe set with parity has a maximum capacity of 140 GB and currently has 15 GB free. Ezonexam1 runs an application that is used by all of Ezonexam.com's employees.
A new version of the application is available. The new version requires Windows 2000 Server. The application will not run on a domain controller.
You need to install the new application on Ezonexam1 as quickly as possible.
What should you do first?
A.Install Windows 2000 Server on Ezonexam1. Configure Ezonexam1 to use a dual boot configuration that includes Windows NT Server 4.0 and Windows 2000 Server.
B.On a second Windows 2000 Server computer, run the sysprep utility to create a cloned server image. Use this image to upgrade Ezonexam1.
C.Upgrade Ezonexam1 to be a Windows 2000 member server. After the upgrade, run the dcpromo utility on Ezonexam1.
D.Upgrade Ezonexam1 to Windows 2000 Server. During the upgrade, select the option to make Ezonexam1 a member server.
第2题:
You are the administrator of a Windows 2000 Server network that runs in mixed mode. You install a new Windows 2000 Server computer. You create and share a new HP LaserJet 4L printer.
Your Windows 2000 Professional client computer can print to the new printer successfully. However, when users try to connect to the printer from Windows NT Workstation 4.0 client computers, they receive the dialog box shown in the exhibit.
You want the printer driver to install automatically on the Windows NT Workstation computers. What should you do?
A.Copy the Windows NT 4.0 printer drivers to the Netlogon shared folders on all Windows NT Server 4.0 computers still configured as BDCs.
B.Copy the Windows NT 4.0 printer drivers to the Netlogon shared folders on the PDC emulator.
C.Change the sharing options on the printer to install additional drivers for Windows NT 4.0 or Windows 2000.
D.Copy the Windows NT 4.0 printer drivers to the Winnt\System32\printers\drivers folder on the Windows 2000 print Server.
第3题:
The network consists of a single domain named Ezonexam.com that includes 20 Windows NT workstation 4.0 client computers. All other client computers are Windows 2000 Professional computers. You install Terminal Services on one of the Windows Server computers and Terminal Services Client on the 20 Windows NT Workstation 4.0 client computers. You create a system policy on the server that is configured as the terminal server. This system policy denies access to Network Neighborhood. You find that the users of the terminal server can still browse the network when they open My Network Places from Windows 2000 Professional computer or when they open Network Neighborhood from Windows NT Workstation 4.0 computers.
You want to prevent all users from browsing the network.
What should you do? (Each correct answer presents a complete solution. Choose two.)
A.Create a Windows Group Policy that denies user access to My Network Places.
B.Copy the Windows NT policy file to the 20 Windows NT Workstation 4.0 computers.
C.Create a Windows NT 4.0 default user policy on the Windows 2000 Server computer that is configured as the PDC emulator.
D.Modify the Windows NT policy template file so that you can restrict access to both My Network Places and Network Neighborhood. Save the policy file on the terminal server.
E.Configure the terminal server to use Application server mode. Select the Permissions compatible with Terminal Server 4.0 Users option.
第4题:
You want to upgrade a Windows NT Server 4.0 computer named Server34 to Windows 2000 Server. Server34 is a member server in a Windows 2000 domain named marketing.fabrikam.local. The domain runs in native mode.
You want to change the role of Server34 from a member server to a domain controller in the same domain. What should you do? (Choose Two)
A.Reinstall Windows NT Server 4.0 on Server34 in the same WINNT folder, and make Server34 a BDC in the marketing domain.
B.Use Server Manager on Server34 and promote Server34 to a PDC for the marketing domain.
C.Upgrade Server34 to Windows 2000 Server.
D.Run the Active Directory installation wizard to make Server34 a domain controller in the marketing.fabrikam.local domain.
E.Run the Active Directory installation wizard to convert Server34 to a domain controller in the marketing.fabrikam.local domain.
第5题:
You are the administrator of a network that consists of a single Windows NT 4.0 domain. The network contains five Windows NT Server domain controllers and 1,000 Windows NT Workstation client computers.
You want to install Windows 2000 Server on a new computer. You want the new computer to act as domain controller in the existing domain.
What should you do?
A.On the new computer, install Windows NT Server 4.0 and designate the computer as a BDC in the existing domain. Promote the computer to the PDC of the domain. Upgrade the computer to Windows 2000 Server.
B.On the new computer, install Windows NT Server 4.0 and designate the computer as a PDC in a new domain that has the same NetBIOS name as the existing Windows NT domain. Upgrade the computer to Windows 2000 Server. Use the Active Directory sites and services to force synchronization of the domain controllers.
C.Shut down the PDC of the existing Windows NT domain from the network. On the new computer, install Windows 2000 Server, and then run the Active Directory installation wizard to install Active Directory, specifying the same NetBIOS name for the Windows 2000 domain as the existing Windows NT domain. Restart the Windows NT PDC on the network and demote it to a BDC.
D.Shut down the PDC of the existing Windows NT domain from the network. On the new computer, install Windows 2000 Server, and then run the Active Directory installation wizard to install Active Directory as a replica in the existing Windows NT domain. Promote the new computer to the PDC of the domain. Restart Windows NT PDC on the network and demote it to a BDC.
第6题:
You are the network administrator for Ezonexam. The network includes a Microsoft Windows NT Server 4.0 member server computer that has a non-Plug and Play ISA network adapter.
You want to upgrade this computer to Microsoft Windows 2000 Server. You also want to ensure that you maintain the current device configuration during the upgrade.
What should you do? (Each correct answer presents part of the solution. Choose two)
A. Install the latest driver for the network adapter.
B. Disable the network adapter.
C. Start the upgrade process by using Winnt32.exe
D. Start the upgrade process by booting from the Windows 2000 Server compact disc.
E. Configure BIOS to reserve the IRQ currently in use by the network adapter.
F. Press F6 at the beginning of the text mode setup to specify an additional driver.
第7题:
You are the network administrator for Ezonexam.
Ezonexam14 is one of 10 Windows NT Server 4.0 member servers in a Windows 2000 domain named marketing.Ezonexam.local. The marketing domain also has five Windows NT 4.0 backup domain controllers. The marketing.Ezonexam.local domain is the child domain of Ezonexam's root domain, Ezonexam.local.
You want to upgrade Ezonexam14 to Windows 2000 Server and change the role of Ezonexam14 from a member server to a domain controller in the same domain. You also want to be able to implement Universal Groups in the marketing domain.
What should you do? (Each correct answer presents part of the solution. Choose three)
A. Upgrade all of the Windows NT Server 4.0 member servers in the marketing domain to Windows 2000 Server.
B. Upgrade all of the Windows Server 4.0 backup domain controllers in the marketing domain to Windows 2000 Server.
C. Upgrade Ezonexam14 to Windows 2000 Server. Run the dcpromo command to make Ezonexam14 a domain controller in the marketing.Ezonexam.local domain.
D. Upgrade Ezonexam14 to Windows 2000 Server. Run the dcpromo command to make Ezonexam14 to a domain controller in the Ezonexam.local domain.
E. Use the Active Directory Domains and Trusts tool to change the Ezonexam.local domain mode to native mode.
F. Use the Active Directory Domains and Trusts to change the marketing.Ezonexam.local domain mode to native mode.
第8题:
You need to install Windows 2000 Server on one of your older Windows NT Server 4.0 computers. The server has dual processors, 2 GB of RAM, a RAID controller with five SCSI hard disks in an array, and a generic 10/100-MB network adapter. You begin the server installation by updating the SCSI firmware.
You then start the installation of the Windows 2000 Server operating system. During the next portion of the installation, you receive an error message indicating that no hard disks can be found.
You want to successfully install Windows 2000 Server on the computer.
What should you do? (Each correct answer presents part of the solution. Choose two)
A.Restart the installation by using the Windows 2000 Installation CD-ROM. Press F3 during the text-mode setup.
B.Restart the installation by using the Windows 2000 Installation CD-ROM. Press F6 during the text-mode setup.
C.Restart the installation by using a MS-DOS boot disk with a CD-ROM driver.
D.Insert a disk with the original SCSI firmware.
E.Insert a disk with the OEM SCSI driver.
第9题:
You are installing Windows 2000 Server on a new computer that has a hardware-based RAID array, a floppy disk drive, and a CD-ROM drive. The disk controller for the RAID array is not included on the current Hardware Compatibility List (HCL). You run Windows 2000 Setup by starting the computer from the Windows 2000 Server CD-ROM.
When the computer restarts at the end of the text mode portion of Windows 2000 Setup, you receive the following STOP error: "INACCESSABLE_BOOT_DEVICE ".
Which two actions should you take to eliminate the STOP error? (Choose Two)
A. Modify the Boot.ini file.
B. Restart Windows 2000 Setup by using the Windows 2000 Server CD-ROM.
C. Select Safe Mode from the Windows 2000 boot menu.
D. Remove the Windows 2000 Server CD-ROM from the CD-ROM drive.
E. Install a driver for the RAID controller form. a floppy disk.
F. Use Device Manager to update the driver for the RAID controller.
第10题:
You are the network administrator for Ezonexam.com.
You are planning to upgrade 10 Windows NT Server 4.0 computers to Windows 2000 Server. You want to perform. the upgrades by means of a distribution folder. You have used the distribution folder to successfully upgrade other Windows NT Server 4.0 computers to Windows 2000. For these 10 new upgrades you wan to include a new service pack.
You need to include the new service pack in the distribution folder so that the service pack is automatically installed during the upgrade process.
What should you do?
A.Create a sub folder named $OEM$\$C\SP under the i386 folder. Copy the new service pack to that subfolder.
B.Create a subfolder named $OEM$\$$\SP under the i386 folder. Copy the new service pack to that subfolder.
C.Run Update.exe from the new service pack and specify the -s option.
D.Run winnt32 on the Windows NT Server 4.0 computers and specify the /u option