单选题A client purchased a new internal hard drive to act as a second drive on a legacy machine. When the client attempts to install the drive, the cable connector on the new drive is not compatible with the available IDE cables. It is determined that the cl

第1题：

A technician has lost a necessary jumper for a new hard drive that must be installed immediately.Which of the following is the BEST solution?（）

• A、Use a jumper from the motherboard where the new drive is going to be installed.
• B、Use a jumper from a hard drive that is no longer functioning.
• C、Contact the manufacturer of the new hard drive and have a replacement jumper shipped immediately.
• D、The new hard drive must be replaced

第2题：

The security team has implemented new guidelines on how to handle sensitive information storedon workstations based on a past incident involving information found on donated workstations.Which of the following should be completed by technicians before donating the workstations?（）

• A、Install a new operating system
• B、Delete users’ data before donation
• C、Write the drive with 1’s and 0’s three times
• D、Delete all partitions of the hard drive

第3题：

第4题：

A technician has installed a secondary hard drive for a computer. However, the hard drive is not appearing under My Computer. The disk is receiving power, and appeared on the POST when Windows started. Which of the following Windows utilities would help configure the new hard disk?（）

• A、Disk Management
• B、Services and Applications
• C、Removable Storage
• D、Device Manager

第5题：

A computer has been upgraded with a new hard drive and after reassembling the computer and turning the computer on， the drive LED remains lit and an error message during power-on self test （POST） states， ’No Drive Present.’ Which of the following would MOST likely be the cause？（）

• A、The motherboard was damaged and needs replacing.
• B、The floppy drive was not reconnected.
• C、A configuration disk was left in the floppy drive.
• D、The ribbon cable has been installed incorrectly.

第6题：

After installing a new SATA hard drive the technician notices the drive is hot to the touch and is giving off a slight odor. Which of the following should the technician do? （）

• A、Install a larger fan near the hard drive to cool the system.
• B、Clean the drive with compressed air and continue to use it.
• C、Remove and replace the drive.
• D、Apply more thermal compound and reseat the drive.

第7题：

A technician is working on a new computer running Windows XP and the hard drive is formatted at 20GB but is an 80GB hard drive. There is not another partition and no extra space can be foundunder Windows explorer.  Which of the following would be the BEST way to partition the remainder of the hard drive without data loss？ （）

• A、Add another hard drive and use that available space.
• B、Run FDISK.
• C、Use the Disk Management tool.
• D、Back up all important data to an external drive then reformat the hard drive.

第8题：

第9题：

Two new servers are purchased and need to be installed to allow sharing of a single external hard drive enclosure.  One server is configured as a local file server， and the other as a database server for a different network.  The onsite technician notices that when both servers are running at the same time， they each receive SCSI errors. When they are running individually， no errors are reported.   Which of the following is the BEST source of information to use for troubleshooting this problem？（）

• A、 the server vendor’s FAQ website
• B、 the SCSI controller vendor’s user manual
• C、 the drive enclosure vendor’s user manual
• D、 the network operating system vendor’s website

第10题：

An administrator has added a new hard drive to a server that is running out of space on its C Drive and is experiencing slow performance.  The administrator needs to free up space on the C Drive.Which of the following is the BEST action for the administrator to take to free up space on the drive？（）

• A、Move the page file to the new drive.
• B、Copy the system32 directory to the new drive.
• C、Convert the C drive to a basic disk.
• D、Setup a software RAID to mirror the C drive.